How To Service An Outboard Motor

How exercise you make clean an outboard motor?

Make clean your outboard motor regularly to proceed information technology performance properly. If non, dirt tin can get stuck, clogging information technology upward. This, as well every bit algae, chemicals and salt must be flushed out of the cooling system. Information technology is peculiarly important to forestall salt deposits from building upwards. A flusher can be used for this purpose while the engine is out of the water. Motor flushers are used for cleaning the outboard and for maintenance work, and are usually continued with a gar-den hose and fresh water supply.

flush

How do yous use a flusher to clean an outboard motor?

If your motor has been out of the water for a longer menstruation of time, it makes sense to flush it. This not only applies to utilise in salt water, merely also fresh h2o that contains sand, gravel or dirt. Flush your outboard with a flusher. Alternatively, you can likewise identify the motor in a barrel of water and rinse it there.

Checklist for flushing your motor:

Adhere the flusher to the lower part of the outboard and connect a garden hose. The more than flexible the hose, the better.

To avoid damage to the engine, do not open the tap to more than than about ¼ of the maximum possible water force per unit area.
Let the engine to warm to operating temperature and so that the thermostat opens and water flushes the cooling organisation.
Cheque the h2o pump and make certain plenty water is being pumped through the hose. Carefully identify a finger through the h2o stream (indicator). The water should be warm, but not hot.
When flushing the outboard engine, loosen the fuel connection so that the engine burns the remaining fuel in the carburettor.

Wipe the outboard engine and spray with corrosion protection. Protect the outboard engine with a tarpaulin or cover between uses.

Is your outboard bleed piping blocked?

If the indicator jet is not very strong, it could be exist-cause dirt has accumulated in the drain pipe. In this instance, switch off the outboard engine im-mediately to prevent overheating and damage. Try to loosen dirt by moving a piece of wire dorsum and forth in the drainage pipe. Restart the outboard engine and check the indicator water period. If the problem persists, a new water pump may be required.

Maintenance and treat your
outboard motor

Non only should y'all regularly clean your outboard motor, maintenance and care are also detrimental to prolonging service life and functionality of outboards. Regular checks can prevent major damage and stop problems from occurring at an early on stage. In our online shop y'all will discover all the tools and spare parts you need for the care and maintenance of your outboard motor. Our service-kits accept proven particularly useful for boat engines.

Checklist for maintenance & servicing your
outboard motor:

Cheque the fuel line regularly for cracks and signs of wearable. Nosotros supply fuel lines that are uniform with about all outboard models. Make certain that the pump ball is gratis from cracks and movable.

Brand sure that the fuel connections to the lines are sitting correctly and do not leak. These can too exist establish here.
Check the hose clamps on the fuel line for rust or corrosion.
The outboard -tank: Check the fuel tank for damage. Check the tank ventilation to ensure that it is working properly. Check the tank regularly for h2o in the fuel. This is particularly important for fuel containing ethanol.
If the outboard engine has a transparent fuel strainer, check if h2o has accumulated at that place. The water collects every bit a clear layer at the lesser of the strainer. If present, remove the water.
Lubricate the movable parts of the trim system and lubrication points of the steering organisation every 100 hours or annually (whichever occurs beginning).
Cheque the outboard engine for corrosion and supplant sacrificial anodes if they are more than 50% corroded. Further information tin exist constitute in the guide under checking sacrificial anodes.
Change the engine oil and replace the oil filter if present.
Replace the water pump impeller later on every 300 hours of use or every three years (more often if you use the outboard engine in waters where sand tin can get into the cooling circuit).
Cheque the outboard engine for minor paint damage. Remove any rust or blisters as chop-chop every bit possible to avoid major impairment.

Inspection

What to expect out for during the outboard inspection

What to look out for during the outboard inspection. During the warranty period, always accept your outboard motor serviced by an authorised dealer, with entries in the service booklet. If any warranty claims are fabricated, the specified inspection intervals must have been observed, otherwise warranty claim is invalid. After the warranty period has expired, you may also bear out repairs and inspections yourself using an inspection plan, which is ordinarily supplied with the product.

Written by our SVB (technical) experts

Our squad of SVB technical experts is there to give our customers professional advice on all matters relating to technology on board. Their expertise is the result of regular training and many years of experience.